The Ranch Hitch Adapter is very easy to use. Most gooseneck receivers require you to get into the bed of your truck to latch the coupler; not so with the Ranch Hitch Adapter. The remote cable mechanism allows you to engage and release the coupler while standing on the ground outside your pickup. The bell shaped receiver allows for the hitch ball and adapter to be as much as 3" off center, and still slide into place correctly.

Our Ranch Hitch Adapter is quick and easy to install (see instructions {hyperlink}). The installation is simple and takes roughly an hour to complete. To see if the adapter will fit your 5th wheel, do the following: Back your truck into position to hook up your 5th wheel. Measure from the "pin plate" (the bottom of the pin box) down to the top of the ball in the bed of your truck. When the adapter is fully compressed that measurement is11 3/4". It has 3" of adjustment, so when it is fully extended that measurement will be 14 3/4". You should have 5" or 6" of clearance between the over-hang and the sideboards of your truck, keeping in mind your 5th wheel should be level for traveling.

Fits standard 2 5/16" gooseneck ball hitch.
24,000 lb. trailer GVWR and 6,000 lb. tongue weight.
3" vertical adjustment.
Kit includes all hardware for attachment to 5th wheel trailer.
Easy installation, even an inexperienced do-it-yourselfer can install it in less than an hour.
Only adapter with remote coupler release.
Only V19 adapter on the market.