NO AIR SHIPPING
No International shipping
NO POSTAL shipping
Information, description, specs and instructions shown is written and provided by manufacturer:
How to: (MANUFACTURER VHT INSTRUCTIONS AND PRODUCT INFO SHOWN)
Clean surface with a window or glass cleaner. Shake can for one minute after the ball in the can begins to rattle. Agitate can well. Shake for one minute after marble is heard. Hold can 12 inches away from the lens. Apply in a crosshatch motion, be sure to spray past the lens so that the corners and ends are evenly covered. Apply subsequent coats approximately 10 minutes apart, usually two or three coats will achieve desired look. VHT NITE SHADES should be dry to the touch in about an hour and completely dry overnight. Do not reinstall until coating is completely dry. Apply VHT NITE SHADES to the outside of the lens cover only. Remove lens cover from the vehicle before applying. VHT NITE SHADES is a transparent coating, apply in smooth, even strokes approximately 3 minutes apart. Apply thin coats until a desired darkness is achieved usually two or three coats is sufficient.
*For off road use only*
**This product can be shipped ground only, 48 states only. This product cannot go POSTAL mail, sorry. NO express ship methods.