See the PXAMG NISSAN IPOD ADAPTER with HD RADIO, CLICK HERE

---

AXXESS XIAH interfaces at AUTOTOYS.COM

• Finally, we provide an interface to your factory radio which is customized to the devices you need.
  Default is a custom iPod adapter which gives you a direct connection into your factory with direct sound and control.
• Direct connection to your factory radio, clear unmodulated sound.
• Charges ipod when connected
• Optional is a 2 line LCD display which can show text information for radios which do not have the capability to show text on the radio display.
• At the same time, you can add options such as a regular aux cable or XM tuner. We will provide all the options you need in one package, so you pay for only the options you need.
  
  This interface allows you to connect
  - XM TUNER via TERK XMD1000
  - Ipod via direct connection
  - RCA input
  
  

When the XIA interface is installed, the radio will see the interface as a cd changer. It is highly recommended to get the OPTIONAL XIA-LCD display to get the most out of your Ipod or XM (see optional drop down menu). If there is a factory cd changer already in the vehicle that is not an in dash (internal), the cd changer will have to be disconnected. Internal (inside radio) cd changers are not affected and remain operational.

Installation note: After installation the radio must be turned on and off at least 3 times, pausing 6 seconds in between. This will synchronize with the external equipment such as the ipod or xm tuner.



Compatible with:

The oem radio must be capable of working an external cd changer (model part numbers H260 and H290) and if the cd changer is equipped, it must be disconnected

NISSAN Models:

350Z 2003-2005
Altima 98-05
Armada 05
Frontier 98-06
Maxima 98-05
Murano 03-06
Pathfinder 98-05
Quest 98-06
Sentra 98-05
Titan 04-06
Xterra 00-05

CONFIGURE YOUR ADAPTER You can order this converter in multiple configurations. Please select the option that will suit your needs. You need to SELECT the correct option from the DROP DOWN MENU shown above. We will include the necessary cables with your configured option
	Auxiliary only	Auxiliary RCA input only (one pair of RCAs)
	Ipod only	Ipod only, will plug into interface and then a long 6 foot cable goes to bottom of your Ipod
	XM only	XM cable for XMD tuner. Please note: a TERK XMD1000 xm tuner is required to complete the package and is not included. The Terk XMD1000 tuner will also have the antenna. You can buy the TERK XMD1000 tuner in the RELATED ACCESSORIES area.
	Ipod and Auxiliary	Ipod cable and Auxiliary RCA
	XM and Auxiliary	XM cable for XMD tuner and Auxiliary RCA (Terk XMD1000 tuner is required and not included)
OPTIONAL DISPLAY An optional 2 line display with controls is optional. Select from the drop down menu. Select ADD OPTIONAL display and we will add the 2 line display.
	More info on optional 2 line display
Some factory radios CANNOT display text information from your ipod. We offer this OPTIONAL display to be used with our XIA line of ipod interfaces to give you a 2 line display AND more advanced music search options. Unique product on the market not only gives you greater control and more information (that you can use) and provides you the most value retaining your factory radio. The XIA-LCD is used to display information for XM Satellite and Ipod such as song title and artist, in vehicles that do not have a radio display screen built in. For the iPod, the unit provides an additional feature of BROWSING through the playlists, artists, albums and genre. Operating instructions are included. The XIA LCD connects to the XIA interface (ask us) to provide a visual display of information from the iPod or XM Satellite tuner whichever is the active device at the moment. The display mounts on the vehicle dashboard with several strips of adhesive tape located on the rear of the unit. The LCD comes with a 4 pin DIN connector for mating to the XIA interface. The cable is approximately 6 ft in length. The LCD display provides 2 lines of information containing 16 characters per line. Typically, the top line is used to display the song title and the second line is for the Artists name. The unit is powered and controlled by the XiA Interface. The backlighting on the display is turned on by the application software and remains on until satellite or ipod mode is no longer selected or power is disconnected when the vehicle is turned off. Four buttons on the unit provide control signals to the XIA interface - Channel / Track Up/ Channel Track / Down, Enter and Escape. In satellite tuner mode the ENTER and ESCAPE buttons are not used. Operation in SATELLITE mode. The LCD display unit shows information from the XIA interface that is operating in the SATELLITE TUNER MODE. The up and down arrows are used to select the next and previous channel station. As the buttons are pushed and the XM receiver performs the change, new information from the receiver is sent to the display unit. This could be station name, song title and artist. Operation in IPOD MODE. The display unit shows information received from the XIA unit that is operating in this mode. In the Ipod mode, the up and down arrow buttons are used for scrolling through information in ipod memory. New information from the ipod is sent to the display unit each time the arrow buttons are pushed. As an added feature, a browse mode can be also performed with the LCD display. Using ENT and ESC buttons, the user can enter and exist browse mode. The up and down scroll buttons are used to scroll through information in the various catefories. For example, pressing ESC button enters the browse mode. The up and down scroll button searches the information in the category. The ENT button is used to activate the selection chosen from scrolling the information. When in the BROWSE mode, the ESC button cab be pressed at any time to go to the previous category or to exit the browse mode completely. It should be noted that when the ipod is working with the XIA interface, the controls on the face of the ipod are disabled until it is connected from the cable connecting it to the XIA interface. Allows greater control over your ipod or xm satellite radio by giving you two lines of display and more advanced music search options. Perfect for radios that do not display text. Requires one of our XIA line of Auxiliary ipod interfaces.

BASIC CONTROLS
(controls will vary with each vehicle model and radio model). The radio will not have every button described below but the definition of the buttons displayed on the radio will still be valid.

*** The original OEM CD Changer or EXTERNAL satellite receiver must be disconnected

USING THE XM SATELLITE TUNER AND IPOD via SAT MODE

To enter XM or IPOD mode press the SAT button if the radio has one. If the radio does not have a SAT button, press the BAND button and you should see XM displayed

When listening to XM RADIO you can change the channel with TUNE UP or TUNE DOWN. To change to the type of music you are listening to press the SEEK UP and SEEK DOWN. The radio will display for example COUNTRY, CHRISTIAN, or ROCK as the music GENRE. The method of the setting presets and selecting preset is the same procedure specified in the radio instructions, to set up a preset hold the button down until you hear a beep. To select a preset just press the desired button.

TO ENTER IPOD MODE **** the SAT or band button and observe IPOD IN on the display. When listening to the IPOD you can change thr track by using TUNE UP and TUNE DOWN buttons. To change to a different playlist, press either seek up or seek down. The ipod will advance to the next playlist that has songs. If you want to scan through the songs, then press the scan button. When you want to end the scan mode, press the scan button again. The song that was playing when scan will turned off will continue to play

When you FIRST enter IPOD mode, buttons 1 to 4 can be used to browse the IPOD categories. Press buttons 1 through 4 until you hear a beep wen using each one. Once that is done, you can browse the IPOD. Press 2 to enter browse mode. Then you can either 1 or 4 to go up or down the selection of caterogoes that can be browsed. When you find a category you would like to browse presss 3. Browse through the selections using th same buttons (1 or 4) until you find your choice then press 3. Button 3 enters the choice that you have picked. At any time you can end the browsing of the category or browsing mode completely by pressing 2.

Using XM or IPOD using CD Changer MODE

To enter XM or IPOD mode press the CD/CHG button

When listening to xm radio you can change the channel with tune up or tune down. If you go to a different selection of music then you can press either 1 or 2.

When listening to IPOD you can change the track by using tune up or tune down. If yu want to scan through the songs then press the scan button, When you want to end the scan, press the scan button again. The song that was playing when scan was turned off will continue to play. To start browsing the ipod, press 2 to enter browse mode. Then you can press either 1 or 4 to go up or down the selection of categories that can be browsed. \

CONTROLS!!!

Power button selectes either ipod or xm mode by toggling between the 2

CD button selects ipod or xm mode by toggling betwee the 2. If a cd is present in the internal cd player, remove the cd from the player to get to ipod or xm mode

FM/XM button deselects XM or IPOD MODE

#1 previous track

#2 PROG in ipod mode this button selects the mode of playing the song selections. As you push the button the screen displays one of the following modes (1, repeats the song, all random shuffles all, random shuffles albums, all plays all songs)

#3 next track

#4 rewind

#6 Fast forward

Track up

Track down

Scan : Scans through songs or channels

MIX IN ipod mode shuffles all songs, no function in XM

 

and then select FM/AM then select TAPE/MD again to access the next source.

FIRMWARE for the IPOD
The firmware in yoru ipod must be the latest revision to operate correctly. Go to apple.com and check your revision with iPod update