ALL SALES FINAL ON THIS ITEM: NO WARRANTY BUT PRODUCT IS NEW AND SOLD AS IS
SEE ALSO the DICE ELECTRONICS i-MAZDA-R here

---

AXXESS XIAH interfaces at AUTOTOYS.COM

• Finally, we provide an interface to your factory radio which is customized to the devices you need.
  Default is a custom iPod adapter which gives you a direct connection into your factory with direct sound and control.
• Direct connection to your factory radio, clear unmodulated sound.
• Charges ipod when connected
• Optional is a 2 line LCD display which can show text information for radios which do not have the capability to show text on the radio display.
• At the same time, you can add options such as a regular aux cable or XM tuner. We will provide all the options you need in one package, so you pay for only the options you need.
  
  This interface allows you to connect
  - XM TUNER via TERK XMD1000
  - Ipod via direct connection
  - RCA input
  
  

When the XIA interface is installed, the radio will see the interface as a cd changer. It is highly recommended to get the OPTIONAL XIA-LCD display to get the most out of your Ipod or XM (see optional drop down menu). If there is a factory cd changer already in the vehicle that is not an in dash (internal), the cd changer will have to be disconnected. Internal (inside radio) cd changers are not affected and remain operational.

Installation note: After installation the radio must be turned on and off at least 3 times, pausing 6 seconds in between. This will synchronize with the external equipment such as the ipod or xm tuner.



Compatible with:

The oem radio must be capable of working an external cd changer (model part numbers H260 and H290) and if the cd changer is equipped, it must be disconnected

MAZDA Models:

• Not compatible with Clarion made radios.
Requires firmware 9.55
MAZDA
•5 2006-2007
•6 2004-2008
•CX7 2007-2008
•Prote
ge
2001-2004

CONFIGURE YOUR ADAPTER You can order this converter in multiple configurations. Please select the option that will suit your needs. You need to SELECT the correct option from the DROP DOWN MENU shown above. We will include the necessary cables with your configured option
	Auxiliary only	Auxiliary RCA input only (one pair of RCAs)
	Ipod only	Ipod only, will plug into interface and then a long 6 foot cable goes to bottom of your Ipod
	XM only	XM cable for XMD tuner. Please note: a TERK XMD1000 xm tuner is required to complete the package and is not included. The Terk XMD1000 tuner will also have the antenna. You can buy the TERK XMD1000 tuner in the RELATED ACCESSORIES area.
	Ipod and Auxiliary	Ipod cable and Auxiliary RCA
	XM and Auxiliary	XM cable for XMD tuner and Auxiliary RCA (Terk XMD1000 tuner is required and not included)
OPTIONAL DISPLAY An optional 2 line display with controls is optional. Select from the drop down menu. Select ADD OPTIONAL display and we will add the 2 line display.
	More info on optional 2 line display
Some factory radios CANNOT display text information from your ipod. We offer this OPTIONAL display to be used with our XIA line of ipod interfaces to give you a 2 line display AND more advanced music search options. Unique product on the market not only gives you greater control and more information (that you can use) and provides you the most value retaining your factory radio. The XIA-LCD is used to display information for XM Satellite and Ipod such as song title and artist, in vehicles that do not have a radio display screen built in. For the iPod, the unit provides an additional feature of BROWSING through the playlists, artists, albums and genre. Operating instructions are included. The XIA LCD connects to the XIA interface (ask us) to provide a visual display of information from the iPod or XM Satellite tuner whichever is the active device at the moment. The display mounts on the vehicle dashboard with several strips of adhesive tape located on the rear of the unit. The LCD comes with a 4 pin DIN connector for mating to the XIA interface. The cable is approximately 6 ft in length. The LCD display provides 2 lines of information containing 16 characters per line. Typically, the top line is used to display the song title and the second line is for the Artists name. The unit is powered and controlled by the XiA Interface. The backlighting on the display is turned on by the application software and remains on until satellite or ipod mode is no longer selected or power is disconnected when the vehicle is turned off. Four buttons on the unit provide control signals to the XIA interface - Channel / Track Up/ Channel Track / Down, Enter and Escape. In satellite tuner mode the ENTER and ESCAPE buttons are not used. Operation in SATELLITE mode. The LCD display unit shows information from the XIA interface that is operating in the SATELLITE TUNER MODE. The up and down arrows are used to select the next and previous channel station. As the buttons are pushed and the XM receiver performs the change, new information from the receiver is sent to the display unit. This could be station name, song title and artist. Operation in IPOD MODE. The display unit shows information received from the XIA unit that is operating in this mode. In the Ipod mode, the up and down arrow buttons are used for scrolling through information in ipod memory. New information from the ipod is sent to the display unit each time the arrow buttons are pushed. As an added feature, a browse mode can be also performed with the LCD display. Using ENT and ESC buttons, the user can enter and exist browse mode. The up and down scroll buttons are used to scroll through information in the various catefories. For example, pressing ESC button enters the browse mode. The up and down scroll button searches the information in the category. The ENT button is used to activate the selection chosen from scrolling the information. When in the BROWSE mode, the ESC button cab be pressed at any time to go to the previous category or to exit the browse mode completely. It should be noted that when the ipod is working with the XIA interface, the controls on the face of the ipod are disabled until it is connected from the cable connecting it to the XIA interface. Allows greater control over your ipod or xm satellite radio by giving you two lines of display and more advanced music search options. Perfect for radios that do not display text. Requires one of our XIA line of Auxiliary ipod interfaces.

BASIC CONTROLS
(controls will vary with each vehicle model and radio model). The radio will not have every button described below but the definition of the buttons displayed on the radio will still be valid.

USING THE IPOD BY ITSELF
preset 1 2 3 and 6 are disabled
1. Select the ipod by pressing the TAPE/MD button until IPOD comes up. The radio display will display MD followed by the song number 1-99 and a running song timer. This is the default display. To display text follow these steps

A. Push the text button
B. The first line displays the song number followed by the keyword PLISH and the current playlist number (0-9)
C. Following the playlist number is the playlist name and after the / separator is the current album. Scroll to the left or right by rotating the text knob to read the whole display lin
D. The second line contains the song title and following the / separator the artist of the current playing song
E. Scroll lefr or right by rotating the text knob to read the whole display line

2. Track up and track down will track up or down within a playlist. At the end of the playlist the track will start for the beginning.
3. Preset 5 will go to the next playlist if you push the button for less than a second, HOLD DOWN preset 5 for more than a second will fast forward through the track playing
4. Preset 4 will go to the previous playlist and rewind track
5. Scan will play the first 10 seconds of each track within the playlist
6. RPT will repeat the current song playing
7. RDM will play the songs within a playlist in a random order

USING THE XM SATELLITE TUNER

Preset 1 2 3 6 RPT and RDM are disabled
Due to limitations in the display the radio displays the station numbers from 1-99, stations numbers 100 200 300 etc will be displayed as 1 and the stations 101-199 201-299 will be displayed as 1-99
When changing channels quickly the channel you stop on might no correspond with what is displayed at that moment but the display will show the correct channel in about a second

1. Select XM by pressing the TAPE/MD button until the XM comes up. The radio display MD followed by the station number and a running song timer, even though meaningless is still needs to be displayed. The radio will not display text if the timer has stopped. This is the default display
A. Push the TEXT BUTTON
B. The first displays the station number followed by the station name and after the / separator the category name
C. Scroll left or right by rotating the text knov to read the whole display line
D. The second line contains the song title and following the / separator the artist of the current song
E. Scroll left or right by rotating the text knov to read the whole display line
2. TRACK UP AND TRACK DOWN will go to the next or previous channel
3. Preset 5 will go to the first station of the next category
4. Preset 4 will go to the last station of the previous category
5 Scan will go to the next station every 10 seconds until pressed again

USING THE AUX IN
1. Select aux by pressing TAPE MD button until AUX comes up
2. There are no other buttons needed to push for the sound to go through the factory radio

USING 2 SOURCES
To select a source when using 2 sources you must select TAPE/MD for the first source and then select FM/AM then select TAPE/MD again to access the next source.

FIRMWARE for the IPOD
The firmware in yoru ipod must be the latest revision to operate correctly. Go to apple.com and check your revision with iPod update