NAV VERSION

This device allows you to install a new aftermarket radio in an otherwise very complicated vehicle. This unit allows you to replace the factory radio and retain the use of the OEM audio system. This unit will also retain the retained accessory power convenience features if the vehicle is so equipped. Special order, final sale item

n the Chrysler/Dodge/Jeep vehicles listed on back there are no 12 volt accessory wires in the factory radio harness making the installer run an accessory wire to the fuse box or underneath the steering column when installing an aftermarket radio. The XSVI-6502-NAV is designed to provide a 12 volt 10 amp switched accessory output along with the rest of the wires needed to install an aftermarket radio. The R.A.P. (Retained Accessory Power) function is retained by the XSVI-6502-NAV. Along with OE equipped steering wheel controls using the steering wheel control output of the aftermarket radio (if equipped).
The XSVI-6502-NAV also provides essential wires required for aftermarket radios that have navigation. Provided is VSS (Vehicle Speed Sense), Reverse, and Parking Brake. This cuts down the installation time since the installer does not have to look for these wires in the vehicle.
Note: The XSVI-6502-NAV does not retain OEM amplifiers.
Wiring the XSVI-6502-NAV
Wiring up the XSVI-6502-NAV is like wiring up any other wire harness that would attach to the aftermarket radios harness. The Metra/EIA wire code can be found on the back of this package that will aid you in the wiring of your aftermarket radio.
Navigation wire colors:
Blue/Pink – VSS (Vehicle Speed Sense) Green/Violet – Reverse
Lt. Green – Parking Brake
Once all connections have been made, plug in the aftermarket radio if not done already.
Do not plug in the ASWC into the XSVI harness yet. Initialize the XSVI interface
With all connections made and harnesses connected to the vehicle, turn the igni- tion key to the ON position for thirty seconds, then turn the key off.
After the XSVI is initialized, plug in the ASWC and refer to the ASWC instructio