|
|
Market price:
$159.00
PRICE: $119.50
|
OnStar® Interface for Class II vehicles. The OS-2 uses a Data Link Controller chip (DLC) that is specifically designed for connecting to GM's Class II data bus. The OS-2 will not interfere with the vehicle's BCM, PCM, ABS, or SRS. OS3
((SHIPPING THE NEWEST SOFTWARE VERSIONS))
**CURRENTLY DOES NOT WORK WITH EQUINOX**
OnStar® Interface for Class
2 non-Bose® vehicles.
*select bose
or non bose from
drop down box above
The
OS-2/class2 uses a Data Link Controller chip (DLC) that is specifically designed
for connecting to GM's Class 2 data bus.
• Safe & Sound Class 2 circuitry will
not disable vehicle data bus even if interface loses power.
• When OnStar® is active, the OS-2 will keep OnStar® on even when the key is
removed and the door is opened. OnStar® will turn off when the call is complete.
• OnStar® active LED and Ignition on LED for visual indication.
• Provides +12v switched accessory output. No more searching for switched +12v
in fuse box or kickpanel.
• Smart Sense Mute output to either mute the aftermarket radio or to turn it
off when OnStar® is active.
• Retains door chimes when used with optional CM1 chime module.
• New radio will operate with the vehicle RAP (Retained Accessory Power) system.
The radio stays on after the key is turned off and stays on for aproximately
10 minutes or until a door is opened.
Known compatible vehicles
(email us for help on cars not listed)
NON BOSE APPLICATION
2003-2006 Escalade
2003-2006 Escalade EXT
2003-2006 Escalade ESV
2003-2006 Avalanche
2005 Corvette
2003-2006 Express
2000-2005 Impala
2000-2005 Monte Carlo
2003-2006 Silverado
2003-2006 Suburban
2003-2006 Tahoe
2000-2006 Trailblazer
2002-2006 Envoy SLT
2002-2006 Envoy SLE
2003-2006 Savanna
2003-2006 Sierra
2003-2006 Sierra Denali
2003-2006 Yukon Denali
2003-2006 Hummer H2
2003-2004 Bravada
2001-2006 Montana
2004-2006 Grand Prix
Notes:
1. The OS-2 does not retain the factory XM receiver, rear seat DVD or the rear
center console controls. You will lose the XM/DVD and rear console option when
the factory radio is replaced with an aftermarket radio.
2 . If you are not retaining the Bose® amplifier, use this OS-2 interface instead
of OS-2Bose® interface. CM1 is also required if Bose® amp is bypassed.
BOSE APPLICATIONS
• So universal it works with Premium Bose® or Standard Bose® sound systems.
- 2003-2005 Escalade* (this vehicles have a premium bose
system that accepts 2 channel audio inputs. The aftermarket radio will NOT
fade, however, it will still continue to balance. Onstar volume can be controlled
via the steering wheel controls. The CM1 chime module is not required when
using the BOSE amplifier. If you are NOT utilizing the BOSE amplifier then
the CM1 is required for this application)
- 2003-2005 Escalade EXT* (this vehicles have a premium
bose system that accepts 2 channel audio inputs. The aftermarket radio will
NOT fade, however, it will still continue to balance. Onstar volume can be
controlled via the steering wheel controls. The CM1 chime module is not required
when using the BOSE amplifier. If you are NOT utilizing the BOSE amplifier
then the CM1 is required for this application)
- 2003-2005 Escalade ESV* (this vehicles have a premium
bose system that accepts 2 channel audio inputs. The aftermarket radio will
NOT fade, however, it will still continue to balance. Onstar volume can be
controlled via the steering wheel controls. The CM1 chime module is not required
when using the BOSE amplifier. If you are NOT utilizing the BOSE amplifier
then the CM1 is required for this application)
- 2003-2006 Avalanche
- 2003-2006 Silverado
- 2003-2006 Surburban
- 2003-2006 Tahoe
- 2000-2006 Trailblazer * (this vehicles have a premium
bose system that accepts 2 channel audio inputs. The aftermarket radio will
NOT fade, however, it will still continue to balance. Onstar volume can be
controlled via the steering wheel controls. The CM1 chime module is not required
when using the BOSE amplifier. If you are NOT utilizing the BOSE amplifier
then the CM1 is required for this application)
- 2002-2005 Envoy SLT* (this vehicles have a premium bose
system that accepts 2 channel audio inputs. The aftermarket radio will NOT
fade, however, it will still continue to balance. Onstar volume can be controlled
via the steering wheel controls. The CM1 chime module is not required when
using the BOSE amplifier. If you are NOT utilizing the BOSE amplifier then
the CM1 is required for this application)
- 2003-2005 Sierra
- 2003-2005 Sierra Denali* (this vehicles have a premium
bose system that accepts 2 channel audio inputs. The aftermarket radio will
NOT fade, however, it will still continue to balance. Onstar volume can be
controlled via the steering wheel controls. The CM1 chime module is not required
when using the BOSE amplifier. If you are NOT utilizing the BOSE amplifier
then the CM1 is required for this application)
- 2003-2005 Yukon Denali* (this vehicles have a premium
bose system that accepts 2 channel audio inputs. The aftermarket radio will
NOT fade, however, it will still continue to balance. Onstar volume can be
controlled via the steering wheel controls. The CM1 chime module is not required
when using the BOSE amplifier. If you are NOT utilizing the BOSE amplifier
then the CM1 is required for this application)
- 2003-2005 Yukon SLT
- Hummer H2 2003*
- Hummer H2 2004-2005
Note:
1. The OS-2Bose® does not retain the factory XM receiver, rear seat DVD
or the rear center console controls. You will lose the XM/DVD and rear console
option when the factory radio is replaced with an aftermarket radio.
2. If the factory Bose® amplifier is not being used, use the OS-2 interface.
3. *These vehicles have a premium Bose® amp that only accepts 2 channel
audio inputs. The aftermarket radio will not fade, however it will still continue
to balance.
4. You may use this interface even if the vehicle does not have OnStar®
but need to interface the Bose® amplifier.
CHIME MODULE REQUIRED FOR
SOME VEHICLES (OPTIONAL)
Scroll down to recommended accessories to see link or search
under cm1
CM1 chime module for use with the OS-2 or OS-2Bose® interfaces
only. The CM1 retains the warning chimes when you replace the factory radio
that have the warning chimes built into it. Keeps seat belt, low fuel, parking
brake, memory seats, security, low brake fluid and other chimes.
VEHICLES WHICH
REQUIRES CM1
- *ALL means
BOSE and NON BOSE applications*
- 2002-2005
Escalade NON BOSE
- 2003-2005 Escalade
EXT NON BOSE
- 2003-2005 Escalade
ESV NON BOSE
- 2003-2005 Avalance
ALL
- 2005 Corvette
ALL
- 2003-2005 Express
ALL
- 2000-2005 Impala
ALL
- 2000-2005 Monte
Carlo ALL
- 2003-2005 Silverado
ALL
- 2003-2005 Surbuban
ALL
- 2003-2005 Tahoe
ALL
- 2000-2005 Trailblazer
NON BOSE
- 2003 Humer
H2 NON BOSE
- 2004-2005 Grand
Prix
Note: The CM1 will not work by itself. It is proprietary. If
you need to retain warning chimes and the vehicle does not hav Bose® or
OnStar®, use the C2R-GM24.
| Customers who bought this also bought... |
|
*All products are new unless otherwise stated. All products sold on this website are aftermarket parts,unless otherwise described in the product details.
^ Be aware of models, years and cars shown compatible in product descriptions, if your year/car/ or model is not shown, EMAIL us FIRST before buying to confirm application. You are responsible for confirming applications before purchase.
† Prices, promotions, specifications, availability and terms of offers may change without notice. Despite our best efforts, a small number of items may contain availablilty, pricing, typography, description or photography errors. All trademarks and trade names are the property of their respective trademark holders.
* AUTOTOYS.COM Online since 1994, over 14 years. Safe Secure SSL ordering *
|
|
