This article highlights
the replacement of the reverse, corner lamps and highbeams of a Late Model Honda Accord. Most Japanese cars and most imports will use the same bulb types. The high beam bulb used in this vehicle is of 80 watts and made by Hiper. The bulbs are always in stock and available in our "BULB DEPARTMENT" in our storefront.
A single filament Polarg M2 bulb in Hyper white was used to replace the reverse lights in this vehicle. It
was easy and simple!
Factory plug for reverse light.
Picture of the reverse light in M2 POLARG Hyper white. Notice how white it is!
Factory bulb shown. Notice how
yellow it is. It was taken a few seconds after the picture above, so there was no light change and there was no editing of this picture.
To remove the parking light corner bulbs, simply remove the 2 tabs from the fender and reach in. We replaced the factory amber colored dual filament bulb with a hiper white color one. Now our parking lights are clear!
The M12 bulb was used. The amber bulb is the factory one.
After picture. The inside low beam light is of a PIAA SUPERWHITE
9006 bulb. The right bulb is of the M12
Factory parking light shown in amber
A pair of 9005 High wattage hi beam bulbs from Hiper White industries was used for the high beams. The closest bulbs seen and compated to real HIDs
Simply turn 1/4 inch,
remove bulb, unplug and replace with new bulb.
Superwhite Piaa 9006 bulb shown on the left, Hiperwhite 9005 80 watt bulb shown on the right.
Factory 9005 high beam bulb shown on the left. (boring)
Superwhite Piaa 9006 bulb shown on the left, Hiperwhite
9005 80 watt bulb shown on the right.
Factory 9005 high beam bulb shown on the left. (boring)
The coolant resovoir was removed to gain access to the bulb.
Visit our other links on bulbs (all autotoys.com installations)
