| |
BACK TO DIY 2000 TECH SUMMARY
Introduction:
This is an autotoys.com installation. One of several
hundred by the staff of autotoys.com
This article is a sample of knowledge gained by working on real
cars for over 18 years.
Online for over 10 years, when you buy a product from us,
we give you real support when you need it.
Instant access to answers through our customer forums. With thousands
of customers, avoid delays, errors and miscalculations in your
installation.. buy from autotoys.com - your outlet for car audio,
car alarms and auto accessories.
Products:
If you have an interest in any of the products
in this article, everything featured (electrical tape, connectors,
radio, alarm, wire ties, rca cables, diodes, screws --- everything is available 'now' (FOR SALE!) through our storefront).
Remember, there may be many manufacturers out there who sell similar
products as the ones featured in our articles, but if you want
a problem-free smooth professional install, your only guarantee is to buy the same parts we use (see our storefront).
Any slight difference in any of the parts and your install is
ruined (plus you won't have access to our post sale support or
forums). Especially important for alarm, radio and OEM changer
products.
Sales People (be careful!)::
Everyday, we get dozens of requests through
our chat & ticket support system, request for forum passwords,
questions on installation problems or questions. We can only focus on questions from our customers. The questions are simple..
the answers are simple - but these people, because they did not
buy from AUTOTOYS.COM cannot get an answer. Dont make a mistake
by buying through auctions, fly by night operations or new pop
up websites who are just a voice over the phone (a sales person)
with absolutely NO EXPERIENCE.
No experience installing in cars, no experience what-so-ever!
They barely know the products they sell! Don't make that mistake!
Make sure your purchase is from autotoys.com. These articles are
proof we know what we are doing and that we WORK IN CARS! We work on the newest cars with
the newest products.
Accord
92 Remote Start Alarm
|
In this installation, we'll
'speed' install an alarm and remote start in a 1992 Honda
Accord. We do it because "WE CAN!" - this shows our knowledge of cars, especially important when you want to buy a CAR ALARM, see OUR CAR ALARM DEPT - WE CAN HELP YOU with your install too!
Since we have done hundreds of Honda alarms, we
said why not. The key is prewiring. We already have the
entire job pictured in our head.
Car:
1992 Honda Accord

|
|
|
We took apart all the parts
in the alarm and prewired, prep it for installation. Make
all our connections on the 3 relay remote start unit with
t-taps (AVAILABLE NOW IN OUR TOOLS DEPARTMENT), electrical
tape all of our wires, divided our main alarm harness and
split it off, power - ignition and brake wire off to one
side while all of our other connectors will split off into
another, prep our doorlock, LED and valet switch wires and
then our STARTER Kill relay with butt connectors (Connectors
available now in our TOOLS department)
Ok,
now we're ready for our 15 minute alarm and remote start
installation
autotoys.com
is the only company that can answer your questions about
this installation. Online for over 8 years. If you have
a question about this installation, something like it, the
missing photos or if you are stuck in one of the steps listed
here, just ask us in our forums! http://www.autotoys.com/forum
- For our customers only! Make sure your purchase is from
autotoys.com and tell your friends!
.
|
 |
Pry down the panel, one
philips head screw in the middle, remove that. There will
be 4 10mm bolts, we had our socket on our power drill already,
off in under 60 seconds, both panels. Next we pulled the door
sill up and pop out the fuse panel -- we then jacked out the
doorlock prewired harness shown and t-taped our connections
(under 30 seconds)
autotoys.com
is the only company that can answer your questions about
this installation. Online for over 8 years. If you have
a question about this installation, something like it, the
missing photos or if you are stuck in one of the steps listed
here, just ask us in our forums! http://www.autotoys.com/forum
- For our customers only! Make sure your purchase is from
autotoys.com and tell your friends!
|
 |
We then drilled a hole with our unibit
in the clutch plate for the tach wire and the siren. The tach
wire is a blue wire next to the black yellow on the distributor.
The siren mounts next to the brake booster. We already had
loomed up and taped the siren and tach wires, just put it
through the hole and mounted the siren (under 1 minute)
autotoys.com
is the only company that can answer your questions about
this installation. Online for over 8 years. If you have
a question about this installation, something like it, the
missing photos or if you are stuck in one of the steps listed
here, just ask us in our forums! http://www.autotoys.com/forum
- For our customers only! Make sure your purchase is from
autotoys.com and tell your friends!
|
 |
Where to run the wires INTO the car. (for siren)
See photo
autotoys.com
is the only company that can answer your questions about
this installation. Online for over 8 years. If you have
a question about this installation, something like it, the
missing photos or if you are stuck in one of the steps listed
here, just ask us in our forums! http://www.autotoys.com/forum
- For our customers only! Make sure your purchase is from
autotoys.com and tell your friends!
|
 |
We then needed to mount the LED, we
drilled a hole with our unibit, in goes the LED and this plugs
into the alarm. Done
autotoys.com
is the only company that can answer your questions about
this installation. Online for over 8 years. If you have
a question about this installation, something like it, the
missing photos or if you are stuck in one of the steps listed
here, just ask us in our forums! http://www.autotoys.com/forum
- For our customers only! Make sure your purchase is from
autotoys.com and tell your friends!
|
 |
We needed a brake shut down wire,
it is green with a white strip. Next to the brake switch,
we t-tapped it. PIECE OF CAKE (under 30 seconds). We already
knew where it was and what color to look for.
autotoys.com
is the only company that can answer your questions about
this installation. Online for over 8 years. If you have
a question about this installation, something like it, the
missing photos or if you are stuck in one of the steps listed
here, just ask us in our forums! http://www.autotoys.com/forum
- For our customers only! Make sure your purchase is from
autotoys.com and tell your friends!
|
 |
We cut open the ignition
harness, tapped all of our wire and ignition lines and made
our starter kill connections. REMEMBER that prewired remote
start harness we had? Well, they plug right in now (couple
of minutes)
SEE PHOTOS
autotoys.com
is the only company that can answer your questions about
this installation. Online for over 8 years. If you have
a question about this installation, something like it, the
missing photos or if you are stuck in one of the steps listed
here, just ask us in our forums! http://www.autotoys.com/forum
- For our customers only! Make sure your purchase is from
autotoys.com and tell your friends!
|
 |
Next, we needed a door
and trunk trigger. The honda has them both up front. Left
of steering wheel, it is black with a white strip and a
green wit h a black strip (both negative).. t-ttapped here
(t-taps available for sale in our TOOLS department)
SEE PHOTO FOR CLOSEUP SHOT
autotoys.com
is the only company that can answer your questions about
this installation. Online for over 8 years. If you have
a question about this installation, something like it, the
missing photos or if you are stuck in one of the steps listed
here, just ask us in our forums! http://www.autotoys.com/forum
- For our customers only! Make sure your purchase is from
autotoys.com and tell your friends!
|
 |
We now plugged in our prewired
doorlock harness which plugs into the alarm, this plugs
into the doorlock plug which is prewired in the car which
we made connections to earlier with t-taps (t-taps and connectors
, male insulated spades available in our tools department)
See photo on how to get
to wires, shows wires EXACTLY as they should be tapped.
autotoys.com
is the only company that can answer your questions about
this installation. Online for over 8 years. If you have
a question about this installation, something like it, the
missing photos or if you are stuck in one of the steps listed
here, just ask us in our forums! http://www.autotoys.com/forum
- For our customers only! Make sure your purchase is from
autotoys.com and tell your friends!
|
 |
ALMOST DONE! Needed a ground, and
we used a 10mm factory ground point with a ring connector
(ring connector available in our TOOLS DEPARTMENT), shown
here! Nice and secure.
autotoys.com
is the only company that can answer your questions about
this installation. Online for over 8 years. If you have
a question about this installation, something like it, the
missing photos or if you are stuck in one of the steps listed
here, just ask us in our forums! http://www.autotoys.com/forum
- For our customers only! Make sure your purchase is from
autotoys.com and tell your friends!
|
 |
Rebolt back on knee bolster, 10mm
autotoys.com
is the only company that can answer your questions about
this installation. Online for over 8 years. If you have
a question about this installation, something like it, the
missing photos or if you are stuck in one of the steps listed
here, just ask us in our forums! http://www.autotoys.com/forum
- For our customers only! Make sure your purchase is from
autotoys.com and tell your friends!
|
|
Thats all the connections
we needed, we plugged in all our harnesses and mounted the
module. Turned on the car, programmed the tach and it was
SET
ALARM
AND REMOTE START in 15 minutes or less by a PROFESSIONAL
group of installers at AUTOTOYS.COM
All
of the connectors, alarm, wires, etc we used in this installation
is available NOW in our storefront.
BUY
FROM REAL INSTALLERS! AUTOTOYS.COM was founded over 10 years
ago by REAL INSTALLERS.
SALES, SUPPORT AND VALUE!
Tell
your friends!
SEE OUR ALARM DEPARTMENT HERE
autotoys.com
is the only company that can answer your questions about
this installation. Online for over 8 years. If you have
a question about this installation, something like it, the
missing photos or if you are stuck in one of the steps listed
here, just ask us in our forums! http://www.autotoys.com/forum
- For our customers only! Make sure your purchase is from
autotoys.com and tell your friends!
|
autotoys.com for post
sale support)
LEGAL
& TERMS OF USE
© 2006 Images, Layout - AUTOTOYS.COM,
All text and information contained in our tech articles is the Intellectual
Property of AUTOTOYS.COM. Reproduction
in any form is strictly prohibited.
Use of published information for any commercial value is prohibited.
Information is provided AS-IS for private use
- use at your own risk. We do not suggest this information
to be accurate. Do not use it as a reference or guide.This information
may be completely inaccurate, so use your own discretion and see a professional
installer if you need help.
SUPPORT
IMPORTANT?
Information
and photos in this article is not public submitted material, it is knowledge
gained by real world experience. Make sure your next purchase is from
AUTOTOYS.COM. A company founded by Real installers! (not sales
people)
Missing
Photos and information.
Questions on this install? Make sure your purchase is from autotoys.com, see our storefront. A few words on what you see in this article.
This is a guide, use the information at your own risk.
Missing photos: Some steps may
have been intentionally left out. These missing photos and steps will
be available to our customers only. This article may also contain crucial
and very important updated information which is available to our customers
only. If you are a customer of ours and this article applies to you, post
a message in the forums here,
we will walk and help you through your entire installation! If you are
NOT a customer of ours, click on the SHOP now button and do it right the first time. Forum access is not a requirement
for filling orders, we reserve the right to grant, deny or remove access
without notice or explanation.
Forum access is
granted to customers with qualifying orders only (make sure all of your
gear, not just your accessories is from autotoys.com)
m |
 |
 |