2001 MITSUBISHI GALANT ALARM

BACK TO DIY 2000 TECH SUMMARY

Introduction:
This is an autotoys.com installation. One of several hundred by the staff of autotoys.com
This article is a sample of knowledge gained by working on real cars for over 18 years.
Online for over 10 years, when you buy a product from us, we give you real support when you need it.
Instant access to answers through our customer forums. With thousands of customers, avoid delays, errors and miscalculations in your installation.. buy from autotoys.com - your outlet for car audio, car alarms and auto accessories.

Products:
If you have an interest in any of the products in this article, everything featured (electrical tape, connectors, radio, alarm, wire ties, rca cables, diodes, screws --- everything is available 'now' (FOR SALE!) through our storefront). Remember, there may be many manufacturers out there who sell similar products as the ones featured in our articles, but if you want a problem-free smooth professional install, your only guarantee is to buy the same parts we use (see our storefront). Any slight difference in any of the parts and your install is ruined (plus you won't have access to our post sale support or forums). Especially important for alarm, radio and OEM changer products.

Sales People (be careful!)::
Everyday, we get dozens of requests through our chat & ticket support system, request for forum passwords, questions on installation problems or questions. We can only focus on questions from our customers. The questions are simple.. the answers are simple - but these people, because they did not buy from AUTOTOYS.COM cannot get an answer. Dont make a mistake by buying through auctions, fly by night operations or new pop up websites who are just a voice over the phone (a sales person) with absolutely NO EXPERIENCE.

No experience installing in cars, no experience what-so-ever! They barely know the products they sell! Don't make that mistake! Make sure your purchase is from autotoys.com. These articles are proof we know what we are doing and that we WORK IN CARS! We work on the newest cars with the newest products.

TO BUY IT NOW!
See our CAR ALARM DEPARTMENT

2001 MITSUBISHI GALANT ALARM

This installation features an OEM ADD ON ALARM SYSTEM

The alarm adds onto any type of factory keyless entry and adds the follow:

Parking light flash on lock and unlock
Shock Sensor, Dual Stage
Starter Kill Optional
Panic through transmitter and siren
Siren confirmation chirps and full sound of siren
Passive arming (optional)
Full protection of all your doors and trunk (and any other entry point)
Compatible with any type of aftermarket alarm sensor including radar perimeter sensors, glass sensors, etc.

Easy to install, cost effective.

Online for over 8 years. If you have a question about this installation, something like it, the missing photos or if you are stuck in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from autotoys.com and tell your friends!

TO BUY IT NOW!
See our ALARM DEPARTMENT

Where to bring your wires in from the engine - See photo

The car was an automatic. So go through the clutch plate for the siren, shown here.

This picture shows where to get to hidden screws, see photo

Remove the philips head screws to gain access to the wires. Behind the panel, remove 2 10mm bolts to remove the metal knee bolster.

More hidden screws. See photo

Here is the domelight wire (-), behind the side fuse access door.

SEE CLOSEUP PHOTO

These are the wires you need for the OEM add on alarm system. You will need 2 motor wires and a lock wire.

We drilled the hole for the LED. We used an VARAD SUPER BRIGHT Fusion BLUE LED for this installation. If you are interested in the same type of LED, see our ALARM department under LED or search under VARAD (its always in stock).

This is a pan shot. Below is the connection for the parking lights (+).

This is our ground connection in the kick panel. Try to use a factory ground point when possible.

This shows how secure our connections are using T-Taps and Male Spades. These same connectors are available in our TOOLS department under CONNECTORS. We even have the same crimping tool available that makes the solid square crimps seen on the connectors.

Connectors used: Red T-taps , Yellow T-Taps for ignition and battery lines, .025 male spades to insert into t-taps.

This is the trunk trigger. We used 18 gauge wire (available in our tools department under WIRE) and tapped the rear trunk trigger wire (so alarm will sound when trunk is opened).

SEE PHOTO, makes things easy!

Back of dash trim where we drilled our LED

This is a photo showing the back where we drilled our VARAD FUSION LED. This picture does not clearly show how bright this LED is. It is so bright that at night, it lights up the entire interior of the car in a shade of blue with each blink. We have this new type of LED available in RED, ORANGE and BLUE. See our ALARM DEPARTMENT under LEDs.

Thats how simple it was. Power, Ground, Ignition, Door trigger, Parking light output, 3 doorlock wires and a Trunk Trigger. We were done. Valet switch and LED plugged in. Shock sensor is built on board (dual stage).

Online for over 10 years. If you have a question about this installation, something like it, the missing photos or if you are stuck in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from autotoys.com and tell your friends!

SEE OUR ALARM DEPARTMENT

autotoys.com for post sale support)

LEGAL & TERMS OF USE
© 2006 Images, Layout - AUTOTOYS.COM™, All text and information contained in our tech articles is the Intellectual Property of AUTOTOYS.COM. Reproduction in any form is strictly prohibited. Use of published information for any commercial value is prohibited.

Information is provided AS-IS for private use - use at your own risk. We do not suggest this information to be accurate. Do not use it as a reference or guide.This information may be completely inaccurate, so use your own discretion and see a professional installer if you need help.

SUPPORT IMPORTANT?
Information and photos in this article is not public submitted material, it is knowledge gained by real world experience. Make sure your next purchase is from AUTOTOYS.COM. A company founded by “Real installers!” (not sales people)

Missing Photos and information.
Questions on this install? Make sure your purchase is from autotoys.com, see our storefront. A few words on what you see in this article. This is a guide, use the information at your own risk.

Missing photos: Some steps may have been intentionally left out. These missing photos and steps will be available to our customers only. This article may also contain crucial and very important updated information which is available to our customers only. If you are a customer of ours and this article applies to you, post a message in the forums here, we will walk and help you through your entire installation! If you are NOT a customer of ours, click on the SHOP now button and do it right the first time. Forum access is not a requirement for filling orders, we reserve the right to grant, deny or remove access without notice or explanation.

Forum access is granted to customers with qualifying orders only (make sure all of your gear, not just your accessories is from autotoys.com)

Shop now in storefront : Tech Section : Forums : Photos : Support Site : Email us

TERMS OF USE
© 2006 Images, Layout - AUTOTOYS.COM™, All text and information contained in our tech articles is the Intellectual Property of AUTOTOYS.COM. A trademark of Sound Conceptions Inc. Reproduction in any form is strictly prohibited. Relisting of our URLs and Image URLs ("framing") on any site outside of the AUTOTOYS.COM domain is strictly prohibited. If you see this article, images or info listed on a site and the URL of the browser page is not "store.autotoys.com" or "www.autotoys.com" please report this violation to us immediately. Use of published information for any commercial value is prohibited. Text with a link back to our site is permitted (for car clubs and forums). Our tech section can be found here

Information is provided AS-IS FREE WITHOUT VALUE for private use - use at your own risk. We do not suggest this information to be accurate. Do not use it as a reference or guide.This information may be completely inaccurate, so use your own discretion and see a professional installer if you need help. We highly discourage external direct-url address links to any of the sub-level URLS listed in our tech section with an exception for search engines.