Introduction:
This is an autotoys.com installation. One of several
hundred by the staff of autotoys.com
This article is a sample of knowledge gained by working on real
cars for over 25 years.
Online for over 17+ years, when you buy a product from us,
we give you real support when you need it.
Instant access to answers through our customer forums. With thousands
of customers, avoid delays, errors and miscalculations in your
installation.. buy from autotoys.com - your outlet for car audio,
car alarms and auto accessories.
Products:
If you have an interest in any of the products
in this article, everything featured (electrical tape, connectors,
radio, alarm, wire ties, rca cables, diodes, screws --- everything is available 'now' (FOR SALE!) through our storefront).
Remember, there may be many manufacturers out there who sell similar
products as the ones featured in our articles, but if you want
a problem-free smooth professional install, your only guarantee is to buy the same parts we use (see our storefront).
Any slight difference in any of the parts and your install is
ruined (plus you won't have access to our post sale support or
forums). Especially important for alarm, radio and OEM changer
products.
Sales People (be careful!):
Everyday, we get dozens of requests through
our chat & ticket support system, request for forum passwords,
questions on installation problems or questions. We can only focus on questions from our customers. The questions are simple..
the answers are simple - but these people, because they did not
buy from AUTOTOYS.COM cannot get an answer. Dont make a mistake
by buying through auctions, fly by night operations or new pop
up websites who are just a voice over the phone (a sales person)
with absolutely NO EXPERIENCE.
No experience installing in cars, no experience what-so-ever!
They barely know the products they sell! Don't make that mistake!
Make sure your purchase is from autotoys.com. These articles are
proof we know what we are doing and that we WORK IN CARS! We work on the newest cars with
the newest products.
| Car:
Honda Accord 4 Door 2000
Alarm:
Prestige APS20 alarm system We’ve already written a few articles about installing an alarm in a 6th Generation Accord. This article goes into more detail in case our other articles did not provide enough information. All connectors and wires, etc can be found in our TOOLS DEPARTMENT HERE
You are not bound to this alarm, you can choose any alarm from our HUGE pickion of security systems in our alarm department, take a look! Buy from real installers! AUTOTOYS.COM - If you have a question, we’ll be there to help you. |
|
 |
Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
 |
If you have this radio in your car, we have a COMPATIBLE 6 DISC CD changer that will plug into the back of this radio, see our OEM DEPARTMENT
Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
 |
This
is what the alarm comes with. Shock sensor, siren, 2 transmitters,
pin switch, plug in led and valet switch.
Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
 |
The doorlock wires are hooked onto our SNAP ON hook shown in photo. The red/black white is + for the parking light flash. The lower right arrow is where we grounded our alarm.
This shows exactly where to grab those wires, see photo
Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
 |
Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
 |
Remove
the center panel, we used a hook and pulled forward. Be careful.
See photo, dont break any clips! Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
 |
Remove
the screws holding the panel which is would be above your
knees when you sit in the driver seat. 2 philips and snaps.
Hidden, see photo Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
 |
More hidden screws, EVERYONE forgets this screw and always breaks the panel/plastic. See photo.
Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
 |
Look for a 2 pin plug, the trunk trigger wire (-) is in this plug. Orange.
See photo |
 |
This
is where you run the siren wire, remove the blank and drill
a hole in the plate where the clutch would fit in standard
vehicles.
Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
 |
Shown
here is the LED mounted. Piece of cake.
Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
 |
Shown
is all of our taps for the doorlock wires and the parking
light lead. The T-TAPS and the insulated male taps are ALWAYS
in stock in our TOOLS DEPARTMENT (shop now or http://www.autotoys.com/x/home.php)
- Makes things easy and neat!
We drilled a 1/4 inch hole (see arrow towards bottom) and hid our valet switch away. To gain access to it, pull out the fuse panel cover to put car in valet mode!You like it? We thought you would. BTW:
The valet switch on this alarm plugs into the main brain
which makes things very easy.
SEE PHOTO Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends!
|
 |
Shown
here is our AUTOTOYS.COM installation.
Shown is the plug in LED, Plug in Valet and Plug in Doorlock wires. We route them to ONE place, tape it up with our 3M ELECTRICAL TAPE (available in our TOOLS DEPARTMENT) and make it neat. Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
 |
Shown
here is our AUTOTOYS.COM installation for the ignition, 12volt
and starter kill wires.
White: 12v constant Black Yellow : IGNITION and Black/White STARTER Shown is our connection to the starter kill relay and the black/white wire cut and connected. See THOSE SQUARE crimps? That tool is available in our TOOLS department and the BLUE connectors are also available. Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
 |
Shown
is the plug for the alarm. If you buy our STARTER KILL HARNESS
RELAY PACK, remove the orange lead from the alarm harness
plug.
Our STARTER KILL RELAY pack with relay will then have the pin connector which will then PUSH in and RECONNECT into the alarm plug as shown. ONLY AT AUTOTOYS.COM Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
 |
Shown
is the new ULEV engine and where we mounted the siren.
Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
 |
We
finished up the siren wire with 3M caulking putty here (available
in our TOOLS department) which molds and forms itself to seal
off all holes. It will prevent the siren wire from chaffing
and also prevent water/air from entering the passenger area
from the engine compartment.
Shown is our MAIN alarm harness attached to all the aux wires (doorlock, led, etc) all taped up. The fuses are taped up to prevent shorting to metal-- One wire harness, one location all routed to the brain. If Troubleshooting is needed, we can do all of our work easily at the brain. Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
 |
The
last step was to connect the domelight wire. It is a black/white
wire located under the PASSENGER FUSE PANEL COVER in a 4 pin
plug (-) - thats it.
This installation took us about 45 minutes to a hour. It was simple because we didn’t even have to run a trunk wire. Hondas are very easy cars to work in. Online
for over 8 years. If you have a question about this installation,
something like it, the missing photos or if you are stuck
in one of the steps listed here, just ask us in our forums! http://www.autotoys.com/forum - For our customers only! Make sure your purchase is from
autotoys.com and tell your friends! |
LEGAL
& TERMS OF USE
© 2011 Images, Layout - AUTOTOYS.COM™,
All text and information contained in our tech articles is the Intellectual
Property of AUTOTOYS.COM. Reproduction
in any form is strictly prohibited.
Use of published information for any commercial value is prohibited.
Information is provided AS-IS for private use
- use at your own risk. We do not suggest this information
to be accurate. Do not use it as a reference or guide.This information
may be completely inaccurate, so use your own discretion and see a professional
installer if you need help.
SUPPORT
IMPORTANT?
Information
and photos in this article is not public submitted material, it is knowledge
gained by real world experience. Make sure your next purchase is from
AUTOTOYS.COM. A company founded by “Real installers!” (not sales
people)
Missing
Photos and information.
Questions on this install? Make sure your purchase is from autotoys.com, see our storefront. A few words on what you see in this article.
This is a guide, use the information at your own risk.
Missing photos: Some steps may
have been intentionally left out. These missing photos and steps will
be available to our customers only. This article may also contain crucial
and very important updated information which is available to our customers
only. If you are a customer of ours and this article applies to you, post
a message in the forums here,
we will walk and help you through your entire installation! If you are
NOT a customer of ours, click on the SHOP now button and do it right the first time. Forum access is not a requirement
for filling orders, we reserve the right to grant, deny or remove access
without notice or explanation.
Forum access is
granted to customers with qualifying orders only (make sure all of your
gear, not just your accessories is from autotoys.com)
m
