|
|
![]() |
![]() |
![]() |
|
|
|||||||||||||||
|
|
|
|
|
|
|
|||||||||||||||
|
|
|
|
|
|
||||||||||||||||
|
BACK TO *1999* YEAR TECH SUMMARY | BACK TO DIY 2000-2006 TECH SUMMARY
Introduction: Products: Shown is a 1998 ACCORD COUPE (may apply for 4 doors as well, see our separate install for rear speakers in a 4 door Accord). Changing the front speakers, performed by the crew of AUTOTOYS.COM - We used Pioneer 1648 speakers because of the low slim profile depth of the front doors.
SEE OUR CAR SPEAKER DEPARTMENT
Shown above is where there are screws, there is one screw near the door
handle. Note, the cap does NOT come off, it simple flips one way to reveal the screw, do not break it by accident! After removing the screw, slide the entire assembly forward towards the front of the car, detach doorlock harness and door handle rod. The arrow points to where there is also another screw holding the door panel in place. After this is removed, the entire panel snaps outward from the bottom out.
You may want to remove the trim in the corner of the doors. Shown above is where the clips are holding in the trim piece.
NOTE: Factory speakers (ugh) .. terrible!
Note: NEW PIONEER 1648 speakers (which are under $80.00 a pair) with new coaxial tweeter and superior construction. Compare to picture in figure 2 of factory speaker. If you can see the difference, imagine hearing the difference. Notice SC7800 to the right of the speaker, this is a PLUG IN CONNECTOR for ALL HONDAS which SOUND CONCEPTIONS (AUTOTOYS.COM) stocks for immediate delivery. This part is under $10.00 a pair and will VIRTUALLY PLUG
your new speakers into the EXISTING factory plug without any cutting! AUTOTOYS.COM stocks all harness, kits and adapters for immediate delivery with your order to get your installation going QUICKLY and hassle free! The 1648 speakers from Pioneer has multiple hole locations, we used them and used the factory screws to secure the unit into place in factory screw hole locations. Note the 4 extra tabs on the outside diameter of the speaker, this is
new for 1998 and this makes this speaker oversized 6.75 compatible for many GM and Japanese vehicles!
Shown above is the speaker with the PLUG in harness attached. The plug in harness is part 7800 in the SPEAKER harness section under HONDA (dash kit, in our storefront)
Shown above is the factory speaker removed from it's housing
Shown above is the factory speaker to the left shown side by side to the new Pioneer 1648 speakers to the right.
Shown above is the speakers mounted into the vehicle. Note: We used the factory screws (silver ones) mounting it into the factory screw holes! No additional holes were drilled or any wires cut in this installation! Well, thats it! Any questions, email us and be sure to visit our speaker section for some unbelievable deals. autotoys.com for post sale support) LEGAL
& TERMS OF USE SUPPORT
IMPORTANT? Missing
Photos and information. m |
|
|
||||||||||||||||||
![]() |
|
|||||||||||||||||||
|
|
|
|
|
|
||||||||||||||||
![]() |
![]() |
|
|
|||||||||||||||||
|
|
![]() |
![]() |
|
|||||||||||||||||
|
|
|
|
||||||||||||||||||
|
|
|
|||||||||||||||||||
|
|
|
|||||||||||||||||||
|
|
|
|||||||||||||||||||
|
|
|
|||||||||||||||||||
|
|
|
|||||||||||||||||||
![]() |
![]() |
|
|
|||||||||||||||||
![]() |
|
|||||||||||||||||||
![]() |
|
|||||||||||||||||||
|
|
|
|
|
|||||||||||||||||
|
|
|
|
||||||||||||||||||
|
|
|
|
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shop now in storefront : Tech Section : Forums : Photos : Support Site : Email us
TERMS OF USE
Information is provided AS-IS FREE WITHOUT VALUE for private use - use at your own risk. We do not suggest this information to be accurate. Do not use it as a reference or guide.This information may be completely inaccurate, so use your own discretion and see a professional installer if you need help. We highly discourage external direct-url address links to any of the sub-level URLS listed in our tech section with an exception for search engines. |